Force Touch Sensor Apple Watch 5 and SE 44mm

Force Touch Sensor for Apple Watch Series 5 and SE 44mm: Pressure Detection and Sealing

The Force Touch sensor for Apple Watch Series 5 and Apple Watch SE 44mm restores pressure-sensitive touch response to the watch interface. This sealing gasket with integrated flex runs along the inner perimeter of the chassis, re-establishing the connection between the screen and the mainboard.

Technical Specifications

• Part type: Force Touch sensor and perimeter gasket
• Compatibility: Apple Watch SE 44mm
• Chassis size: 44mm
• Quality: Premium
• Frame: No — frameless screen, for gluing to the chassis

When to Replace

• The watch does not recognise firm pressure touch on the screen.
• The flex cable tore or was damaged during opening for battery replacement.
• Loss of adhesion or deformation of the peripheral ring after unsticking the display.
• Intermittent pressure command behaviour — confirm the diagnosis.

Notes for the Technician

• Test before applying: connect the screen to the device without gluing it and confirm image, touch across the entire area and brightness, keeping the protective films in place. Thus, if there is any issue, the return or warranty is handled simply and quickly.
• Difficulty: Advanced. Requires careful screen removal using controlled heat to avoid breaking the glass or creasing adjacent cables.
• The component rests directly on the chassis edge; remove all old glue residues and degrease the surface before seating the new sensor.
• The part does not include a frame and requires new specific adhesive for the final fixing of the display to the watch body, sold separately.
• Maintain rigorous alignment of the flex contacts with the board connector to prevent communication failures or short circuits.

What Distinguishes This Version

This part is positioned at the Premium level of high-end compatible components, ensuring precise dimensional tolerances for a correct fit on the 44mm rim. It is the suitable choice for technicians aiming to restore pressure functionality in screen or battery repairs without excessive costs.

Frequently Asked Questions

Is this sensor compatible with 40mm models?
No. This component was designed strictly for the 44mm cases of the Apple Watch Series 5 and Apple Watch SE, differing in bezel dimensions.

Does the sensor bring the glue needed to close the screen?
Does not include mounting adhesive. Gluing the panel to the chassis requires new specific adhesive for assembly, sold separately.