Desoldering Braid 2.5MM 1.5M

Braided Copper Wire for Solder Removal Micro Wire HWY-2515

The desoldering braid Micro Wire HWY-2515 is an essential tool for the precise absorption of excess solder on printed circuits. With a width of 2.5 mm and a total length of 1.5 m, it allows efficient pad cleaning and minimises the thermal exposure time of electronic components during rework tasks.

Technical Specifications

• Manufacturer: Micro Wire
• Internal reference: HWY-2515
• Technical code: HWY-2515
• Width: 2.5 mm
• Length: 1.5 m
• Purpose: Removal and absorption of solder in soldering

What Distinguishes This Model

The 2.5 mm width provides a perfect balance between capillary action capacity and contact precision. It is the ideal format to absorb medium solder volumes on connection pads, connectors and SMD integrated circuits without interfering with neighbouring tracks.

Usage Tips

Place the tape directly over the solder point to be removed and apply the heated tip of the soldering iron onto the braid. Let the molten solder rise by capillary action and remove the braid and tip together to avoid pulling the contact pads. Always cut the solder-saturated section before moving on to the next cleaning.

Frequently Asked Questions

What is the recommended width for this type of intervention?

The 2.5 mm dimension is versatile, suitable for both common dimension pads and surface-mount SMD components.

Can the braid be reused?

Only the part that has not absorbed solder can be used. You must cut and discard the end already filled with used solder.

Ensure clean and reliable repairs on your technical workbench with fast shipping from Portugal.