iPhone 13 Incell LCD and Touch Screen

Incell LCD Screen for iPhone 13: Integrated Touch and Budget Repair

The Incell LCD screen for iPhone 13 is the suitable solution to recover the image and touch control of the mobile phone after drops or failures in the previous module. This display with touch combines the touch layer and the liquid crystal panel into a compact structure, ensuring a fast response to commands.

Technical Specifications

• Part type: LCD and Touch screen
• Compatibility: iPhone 13 (A2482, A2631, A2633, A2634, A2635)
• Reference: MW-IPHONE13IN
• Technology: Incell, LCD with backlight
• Quality: Compatible

When to Replace

• Front glass cracked or shattered after impact
• Panel without image, completely black screen or vertical lines
• Touch that fails in certain areas or does not respond — confirm diagnosis
• Dark spots or uneven illumination in the image

Notes for the Technician

• Test before applying: connect the screen to the device without gluing it and confirm image, touch over the entire area and brightness, keeping the protective films. Thus, if there is any problem, the return or warranty is handled quickly and simply.
• Difficulty: Medium
• Opening via the front panel, requires unscrewing the lower pentalobe screws and applying moderate heat to release the adhesive seal (new adhesive sold separately).
• Disconnect the battery before handling the screen and sensor flex cables to prevent short circuits.
• Transfer the upper sensor and microphone module from the damaged part with extreme care not to damage the flex.
• Check touch response over the entire area and backlight operation before fully closing the device.

What Distinguishes This Version

This version uses Incell LCD technology, being the most economical entry-level option for device recovery. It is the right alternative for those looking for an affordable and functional repair with a good colour and viewing angle LCD panel.

Frequently Asked Questions

Is this LCD screen compatible with the iPhone 13 Pro?

No, this component is intended exclusively for the standard iPhone 13 and does not fit the Pro, Mini or Pro Max versions.

What is the main technical difference of this Incell screen?

By integrating LCD technology with backlight, this version converts the display system compared to the factory panel and presents a slightly higher battery consumption.

Each component is tested by Micro Wire before shipment to ensure full functionality, with fast dispatch from Portugal. If you do not want to repair we can do it for you.