iPhone 16 Pro Max SIM Tray Gold

iPhone 16 Pro Max SIM Tray: Precise Fit and Card Reading

The nano-SIM card tray for the iPhone 16 Pro Max restores the correct positioning of the network chip inside the mobile phone. This original Apple part ensures ideal mechanical alignment with the internal reader, preventing contact failures and allowing the compartment to close with precision. It is the appropriate solution to replace a damaged or misplaced support in the gold colour.

Technical Specifications

• Part type: Nano-SIM card tray
• Compatibility: iPhone 16 Pro Max (A3084, A3295, A3296, A3297)
• Technical reference: SIMT-IPH16PM-TD
• Colour: Gold
• Quality: Original — Pulled

When to Replace

• The tray broke or bent when ejected.
• The mobile phone does not recognise the nano-SIM card due to play in the housing — confirm the diagnosis.
• The tray was lost during a technical intervention or carrier switch.
• Difficulty or physical resistance when inserting or removing the support in the side chassis.

Notes for the Technician

• Test before applying: connect the part to the equipment and confirm its operation before fixing or gluing it definitively. Thus, if there is any problem, the return or warranty is handled quickly and simply.
• Difficulty: Easy.
• Does not require internal disassembly of the mobile phone; installation is carried out directly through the outer hole with a SIM ejection key.
• Check the integrity of the integrated rubber perimeter seal on the part before inserting the tray into the device.
• Make sure the nano-SIM card sits completely level in the recess of the part before sliding it into the interior of the reader.

What Distinguishes This Version

This is a part recovered from equipment, strictly maintaining factory tolerances and the exact finish tone of the chassis. It represents the indicated choice for technicians and users who demand a watertight closure and an indistinguishable aesthetic finish.

Frequently Asked Questions

Is this tray compatible with the standard iPhone 16 Pro?

No. The dimensions and frame outline are specific to the thickness and curvature measurements of the iPhone 16 Pro Max chassis.

The mobile phone continues to indicate 'No SIM' after placing the new tray, what could it be?

If the card is well positioned and the error persists, the problem may lie in the reading pins soldered on the motherboard or in the carrier card itself — confirm the diagnosis.

Each unit is tested by Micro Wire before shipment to ensure dimensional compliance, guaranteeing fast delivery from Portugal. If you do not want to repair it we can do it for you.