iPhone 7 Plus Screen Adhesive

Pre-cut Adhesive Tape for iPhone 7 Plus: Front Panel Sealing and Fixing

The screen adhesive for iPhone 7 Plus allows restoring the correct fixing between the chassis and the front panel after dismantling the device. This sealing tape is an original Apple part essential to ensure the firm closure of the display after any technical intervention on the mobile phone.

Technical Specifications

• Part type: Pre-cut screen adhesive
• Compatibility: iPhone 7 Plus (A1661, A1784, A1785)
• Reference: MW-AM7PLUSOEM
• Quality: Original — Service Pack

When to Replace

• Loose screen or lifting at the edge of the metal frame.
• Screen or battery replacement where the previous sealing tape was damaged.
• Noticeable gap between the chassis and the front glass.
• Loss of structural sealing after opening for diagnosis.

Notes for the Technician

• Test before applying: connect the screen to the device without gluing it and confirm image, touch across the entire area and brightness, keeping the protective films. Thus, if there is any problem, the return or warranty is handled quickly and simply.
• Difficulty: Medium.
• Before installation, the device must be updated to the latest iOS version.
• Lateral opening of the panel: dismantle the two lower pentalobe screws and carefully lift the screen to the right so as not to tear the flex cables of the sensors and the display.
• Thoroughly clean all old glue and grease residue on the chassis frame with isopropyl alcohol before applying the new tape.
• Precisely align the adhesive on the metal frame guides before removing the final protective film.

What Distinguishes This Version

This version corresponds to a factory-new Service Pack component, guaranteeing millimeter cutting and the exact fixing properties defined by the manufacturer. It is the recommended option for technicians looking for rigorous finishing and fidelity to the phone closure.

Frequently Asked Questions

Is this adhesive compatible with the standard iPhone 7?

No. The frame dimensions are different, being compatible exclusively with the iPhone 7 Plus.

Is it necessary to apply heat to fix the adhesive?

It is not strictly mandatory, but slight uniform pressure along the edge ensures correct adhesion to the metal frame.

Component tested by Micro Wire before dispatch and ready for fast shipping from Portugal. If you do not want to repair we can do it for you.