Samsung Galaxy A04S Charging Port

Samsung Galaxy A04s Charging Port: USB-C Connection Replacement

This charging port is designed to replace the damaged connector on the Samsung Galaxy A04s, restoring data communication and mobile phone charging. This charging connector board ensures a correct fit in the lower section of the chassis, enabling a clean and stable repair.

Technical Specifications

• Part type: Lower board with USB-C charging port
• Compatibility: Samsung Galaxy A04s (SM-A047F, SM-A047F/DS, SM-A047M)
• Quality: Compatible

When to Replace

• The mobile phone does not detect the USB cable or fails to start charging
• Poor contact when plugging in the cable, requiring the position to be forced
• Moisture, broken pins or dirt trapped inside the port
• The computer does not recognise the device via the data cable — confirm the diagnosis
• Audio faults in the lower microphone during calls — confirm the diagnosis

Notes for the Technician

• Test before applying: before fixing, confirm charging and, where applicable, data transfer and the microphone. Thus, if there is any issue, the return or warranty is handled quickly and simply.
• Difficulty: Easy to Medium
• Opening carried out via the rear cover, requiring removal of the lower middle bezel to access the board
• Always disconnect the battery before handling or disconnecting the lower board interconnect flex cable
• When positioning the new board, ensure correct alignment of the antenna and microphone pins in the housing
• Check data transmission and charge reception with a USB meter before finishing bonding the cover

What Distinguishes This Version

This high-end compatible part has been selected specifically to offer a reliable solution on the professional workbench. It is the suitable option for technicians seeking a functional and cost-effective repair on the Samsung Galaxy A04s.

Frequently Asked Questions

Is this charging board compatible with the standard Samsung Galaxy A04 model?
No. The Galaxy A04s uses a charging board with its own specifications and fittings, and is not directly interchangeable with the base A04 version.

Is it necessary to solder any component to install this part?
No soldering is required. This is a modular board that connects directly to the main phone flex via pressure connectors.