Samsung Galaxy A52s 5G K1 Charging Port

Charging Port for Samsung Galaxy A52s 5G: Stable Charging and Data Connection

This charging port has been specifically designed to restore the electrical connection and data transfer on the Samsung Galaxy A52s 5G. Replacing the charging sub-board resolves power supply failures and poor contact issues in the USB-C connector.

Technical Specifications

• Part type: Charging port (USB-C sub-board)
• Compatibility: Samsung Galaxy A52s 5G (SM-A528B, SM-A528B/DS)
• Version: K1
• Quality: Compatible

When to Replace

• The mobile phone does not detect the USB-C cable when connected.
• Charging fails or is intermittent depending on the cable position.
• The computer does not recognise the equipment for data transfer.
• Presence of broken, oxidized pins or physical looseness in the USB inlet — confirm the diagnosis.

Notes for the Technician

• Test before applying: before securing, confirm charging and, where applicable, data transfer and the microphone. Thus, if there is any issue, the return or warranty is handled quickly and simply.
• Repair difficulty: Medium.
• It is necessary to heat and remove the back cover, then remove the lower plastic speaker shielding to access the sub-board.
• Carefully disconnect the main interconnect flex cable and antenna coaxial cables before lifting the board.
• Adhesive for closing the back cover sold separately.
• Check correct charging and data communication before finally bonding the back panel.

What Distinguishes This Version

This is a high-end compatible board, designed for reliable professional repairs with optimized cost. It is the suitable choice for technicians who want to restore the charging operation of the mobile phone without incurring high costs.

Frequently Asked Questions

Is this charging port compatible with the Samsung Galaxy A52 4G version?
No, this K1 version is specifically intended for the Samsung Galaxy A52s 5G (SM-A528B), and there may be differences in components and circuit lines compared to the regular 4G and 5G versions.

Does the replacement of this sub-board require soldering?
No, the sub-board connects directly via an FPC connector and quick-fit antenna cables, dispensing with microsoldering processes.