Samsung Galaxy A53 A536B Charging Port

Charging Port for Samsung Galaxy A53 5G: Stable Connection and Effective Charging

This charging port allows you to restore electrical charging and data transmission on the Samsung Galaxy A53 5G. This is the secondary board with a USB-C connector designed to replace the damaged or worn module from daily use.

Technical Specifications

• Part type: Charging board with USB-C connector
• Compatibility: Samsung Galaxy A53 5G (SM-A536B, SM-A536B/DS)
• Quality: Compatible

When to Replace

• The mobile phone does not detect the charger or fails to charge
• Poor contact in the plug requiring you to position the cable at a specific angle
• Computer does not recognise the USB connection when connecting the equipment
• Presence of accumulated dirt, broken pins or moisture in the USB-C inlet
• Charging frequently stops — confirm the diagnosis

Notes for the Technician

• Test before applying: before fixing, confirm charging and, if applicable, data transfer and the microphone. Thus, if there is any issue, the return or warranty is handled quickly and simply.
• Intervention difficulty: Medium.
• Opening carried out by removing the rear cover with moderate heat; new adhesive sold separately.
• Requires unscrewing the lower loudspeaker shielding to access the secondary board.
• Disconnect the battery before releasing the interconnection flex cable and the antenna coaxial cables connected to the board.
• Check the correct attachment of the network coaxial cables and the alignment of the USB-C port seal during installation.

What Distinguishes This Version

This high-end compatible version ensures a precise physical fit and stable communication in the charging circuit. It is the suitable solution for technicians looking for an economical and reliable repair for their clients.

Frequently Asked Questions

Is this charging port compatible with all versions of the Samsung Galaxy A53?
This part was designed for the Samsung Galaxy A53 5G variant with model reference SM-A536B.

Does replacing the lower board require soldering?
No, the part is a complete module that connects via pressure connectors to the main board and antenna cables, without the need for soldering.