Flex Dualshock PS4 Internal Membrane V1 JDM-001 011 020

Conductive Membrane Flex for DualShock 4 V1: Precise Button Response

This internal conductive membrane restores the electrical contact of the buttons and D-pad on the DualShock 4 V1 controller. It is the flexible circuit indicated to solve response failures or stuck buttons caused by the natural wear of the contact traces.

Technical Specifications

• Part type: Internal conductive membrane flex
• Compatibility: DualShock 4 V1
• Compatible boards: JDM-001; JDM-011; JDM-020
• Quality: OEM

When to Replace

• Action buttons (cross, circle, square, triangle) do not respond or fail when pressed
• D-pad or directional buttons stop registering inputs
• L1, R1, L2 or R2 buttons with intermittent response
• Internal conductive traces with visible marks of moisture or friction wear

Notes for the Technician

• Test before applying: connect the part to the equipment and confirm its operation before permanently securing or gluing it. Thus, if there is any problem, the return or warranty is handled quickly and simply.
• Installation difficulty: Medium.
• Requires complete opening of the controller, battery removal and unscrewing of the internal board support.
• Confirm the code engraved on the circuit board (must be JDM-001, JDM-011 or JDM-020) before final assembly.
• Check the correct alignment of the plastic contact pins over the board to avoid poor contact.

What Distinguishes This Version

This OEM version features conductive traces with the appropriate thickness and conductivity for the DualShock 4 V1 controller circuit. It is the indicated choice for technicians who want a reliable and cost-effective repair without compromising the precision of the peripheral.

Frequently Asked Questions

Does this membrane fit any PS4 controller?
No. This flex is exclusively compatible with the first version of the controller (DualShock 4 V1) that uses the JDM-001, JDM-011 or JDM-020 motherboard revisions.

How can I identify my controller revision?
Secure identification is done by opening the controller and checking the code silk-screened directly on the main circuit board (e.g.: JDM-001, JDM-011 or JDM-020).