Front Camera Huawei P40 Pro

Front Camera for Huawei P40 Pro: Clear Capture and Precise Focus

This front camera for Huawei P40 Pro allows you to restore image capture and video calls on your mobile phone. The selfie camera module replaces the damaged sensor, restoring normal operation of the front photographic system. It is the suitable option to return clarity and correct camera application response to the Huawei P40 Pro.

Technical Specifications

• Part type: Front camera (selfie module)
• Compatibility: Huawei P40 Pro (ELS-N04, ELS-AN00, ELS-TN00)
• Quality: Premium

When to Replace

• The camera application closes or freezes when switching to selfie mode — confirm the diagnosis.
• The front image shows stains, permanent scratches or goes completely black.
• Focusing issues or blurred front photographs.
• Image communication failures in video calls.

Notes for the Technician

• Test before applying: connect the part to the equipment and confirm its operation before fixing or gluing it definitively. Thus, if there is any problem, the return or warranty is handled quickly and simply.
• Installation difficulty: Advanced.
• Access to the component requires careful removal of the back cover using moderate heat and new adhesive for the final seal (sold separately).
• Always disconnect the battery before handling or unplugging the camera flex to avoid short circuits.
• Avoid touching the sensor lens directly during handling to prevent leaving residue or oiliness.
• Check the cleanliness of the internal area of the screen glass where the lens rests before closing the equipment.

What Distinguishes This Version

This part integrates the Premium quality level, being the most reliable and stable aftermarket alternative available for the equipment. It is the appropriate choice for technicians looking for a consistent repair with total hardware compatibility.

Frequently Asked Questions

Is the front camera of the Huawei P40 Pro compatible with the base version of the P40?
No. The front camera of the Huawei P40 Pro has specific dimensions and connector slots, and is not compatible with the standard Huawei P40.

Is it necessary to transfer components from the previous part?
It is not necessary to transfer internal components of the module, just make sure to position the sensor correctly in the internal chassis supports.