Galaxy A02S and A03S Charging Port

Charging Port for Galaxy A02s and Galaxy A03s: Power and Data Restoration

This charging port is designed to restore charging and data transfer connectivity on your mobile phone. This is a secondary board with a USB-C charging port designed to replace the damaged module in the Galaxy A02s and Galaxy A03s. Aftermarket part selected to ensure reliable workbench intervention.

Technical Specifications

• Part type: Charging board with USB-C connector
• Compatibility: Galaxy A02s (SM-A025F, SM-A025G, SM-A025M); Galaxy A03s (SM-A037F, SM-A037G, SM-A037M)
• Quality: Compatible

When to Replace

• The USB cable does not fit firmly or comes loose easily
• The device does not detect the charger or charges intermittently
• The computer does not recognise the USB connection to the phone
• Slow charging associated with physical looseness in the connector — check the diagnosis

Notes for the Technician

• Test before applying: before securing, check charging and, if applicable, data transfer and microphone. Thus, if there is any issue, the return or warranty is handled quickly and simply.
• Difficulty: Medium
• Access is gained by removing the back cover and the lower shield with Phillips screws
• Disconnect the battery before handling the interconnect flex cable and the charging board
• Take extra care when disconnecting the coaxial antenna cable near the board edge
• Adhesive tape or fixing glue for closing the cover are sold separately

What Distinguishes This Version

This high-end compatible version was selected specifically for technicians looking for a stable and cost-effective solution. It is the ideal option for professional repairs on devices that need to recover charging functionality without excessive costs.

Frequently Asked Questions

Is this charging board compatible with the Galaxy A02s and Galaxy A03s?
Yes, the board was designed to share assembly in both versions, fitting directly into the Galaxy A02s and Galaxy A03s models.

Is soldering required to install this charging port?
No, the component is a complete sub-board with push-fit modular assembly and snap connectors, requiring no direct soldering.