Charging Port 14 Pin JDS-001 Dualshock 4

Charging Port for Dualshock 4: Micro-USB Port and Power Repair

This charging port with a 14-pin board is designed for the Dualshock 4 controller in the corresponding revision. It is the suitable part to restore the charging connection and data transfer when the power USB board has slack or damaged pins.

Technical Specifications

• Part type: Charging port with USB board
• Compatibility: Dualshock 4
• Quality: Premium

When to Replace

• The controller does not charge or light up the indicator light when connecting the USB cable.
• Need to position the cable at a specific angle to manage to charge.
• Excessive slack or broken pins inside the Micro-USB port.
• The controller is not recognised by the computer or console via USB cable — confirm the diagnosis.

Notes for the Technician

• Test before applying: before securing, confirm charging and, if applicable, data transfer and the microphone. Thus, if there is any issue, the return or warranty is handled quickly and simply.
• Difficulty: Easy.
• Access the interior by removing the 4 outer screws of the controller housing and carefully unclip the latches.
• Check the inscription engraved on the old board to confirm if it is exactly the JDS-001 revision before assembly.
• Disconnect the 14-pin flexible cable carefully to avoid creases or damage to the conductive contacts.

What Distinguishes This Version

This version integrates the aftermarket Premium category, ensuring precise contacts and a stable fit. It is the suitable choice for technicians aiming for a reliable and economical repair on first-generation Dualshock 4 controllers.

Frequently Asked Questions

How can I be sure that my board is the JDS-001?
You should open the controller and check the reference engraved directly on the printed circuit board of the charging board, as well as the count of 14 tracks on the connection flexible cable.

Is this charging board compatible with JDS-011, JDS-030 or JDS-040 controllers?
No. Each Dualshock 4 controller revision uses distinct bracket dimensions and number of pins on the flex, so it must only be installed to replace a JDS-001 board.